Changing Sutorbilt Blower Oil on Prochem Legend GT
- Thread starter bmxin
- Start date
hogjowl
Idiot™
KevinD
Member
#3 Blower?
Only holds about 5.33 ounces in a vertical configuration.
Dolly Llama
Number 5
all my TM's were horizontal. don't recall what the 47 used, but pretty sure the 45's were around 22 ounces.
butt...
I "think" they all use less oil in the vert config regardless of size ?
wonder if there's any data to show one fails more than others given both gear bottoms are in oil as well as more oil vs only lower gear in vert config with less oil?
..L.T.A.
F
FB19087
Guest
Legend GT uses a 4M in vertical configuration I believe
This is a 2013 Legend GT #4 Sutorbilt blower.
The manual says both water pump and Vac Blower have a 14oz capacity.
Maybe that's why I'm right above 1/2mark on site glass using 6oz?
I'll call the JonDon mechanic I know Tuesday as this oil is vulnerable to overheating if too much.
We did use an air compressed tool to help remove as much as possible and I believe the TM mechanics would do no different. I'm not running this at load or on a job yet& If I do this over again to clear doubt I should probably park on a hill like I do when I change engine oil
The manual says both water pump and Vac Blower have a 14oz capacity.
Maybe that's why I'm right above 1/2mark on site glass using 6oz?
I'll call the JonDon mechanic I know Tuesday as this oil is vulnerable to overheating if too much.
We did use an air compressed tool to help remove as much as possible and I believe the TM mechanics would do no different. I'm not running this at load or on a job yet& If I do this over again to clear doubt I should probably park on a hill like I do when I change engine oil
Also manual: "
"Vacuum oil capacity is 14oz at gear end."This is a 2013 Legend GT #4 Sutorbilt blower.
The manual says both water pump and Vac Blower have a 14oz capacity.
Maybe that's why I'm right above 1/2mark on site glass using 6oz?
I'll call the JonDon mechanic I know Tuesday as this oil is vulnerable to overheating if too much.
We did use an air compressed tool to help remove as much as possible and I believe the TM mechanics would do no different. I'm not running this at load or on a job yet& If I do this over again to clear doubt I should probably park on a hill like I do when I change engine oil
hogjowl
Idiot™
Mikey P
Administrator
Just so happened to overfill it this afternoon
how many ounces does that hold?
hogjowl
Idiot™
No idea, but I think it’s good for multiple parking attempts.
The exchange rate here of old Aeon oil vs New Aeon oil doesn't inspire confidence. Here we are as glorified vac cleaners and there's no vac attachment to extract...
Hold my bubbly water:
www.acehardware.com
Hold my bubbly water:
Milwaukee AIR-TIP 1-1/4 in. - 2-1/2 in. Wet/Dry Shop Vac Long Reach Set Flexible Vacuum Hose 7 pc - Ace Hardware
The Milwaukee Air-Tip Long Reach Flexible Micro Hose Set reaches where most vacuum tools cannot go with five interchangeable hose lengths and diameters for many hard-to-reach spaces. Install different hose tubes based on cleaning needs with a quick quarter turn. The Air-Tip Long Reach Flexible...
It looks like something you bought to give better performance under the sheets. Don’t be ashamed.
KevinD
Member
Sutorbilt book shows 12 ounces vertical and 16 ounces horizontal on a 4M
Did you have the link for WestPak 2 Jet hard surface Wand? Interchangeable heads?
Mikey P
Administrator
The World's Greatest Multi-Surface Extraction Wand (or 12" head only option) - GreenGlides - The Original Carpet Cleaning Glide
Custom GreenGlide’s spec’d performance upgrades* AND stainless jets for optimum long lasting performance that you won’t get with other dealers Inline filter installed* Stainless steel Jets (different angle too!)* Vacuum relief ports, if needed* Sealed and secure brush ring* Brass Soft Touch...
greenglides.com
Latest posts
-
-
-
-
-
-
-
-
-
-
-
-
Just add a hard work ethic and the minty fresh breath...- Latest: Cleanworks
-