when you..............

Jim Martin

Supportive Member
Joined
Oct 7, 2006
Messages
10,878
Name
Jim Martin
....get everything all set up and turn on your machine......
do you hook the vacuum hose up to the wand and then ramp up your machine......
or ramp it up and then hook up your hose......???

how much hose back lash do you get...........
 

Shane T

Member
Joined
Nov 7, 2006
Messages
1,663
Name
Shane Tiegs
Most often I will hook up when walk in to start cleaning. I'm guessing that 50' of 2" will back lash 1-2 ft at 12hg and more the higher the hg.
 

steve frasier

Supportive Member
Joined
Oct 9, 2006
Messages
3,375
Name
steve frasier
hook it up the crank it up but the truck is usually running with the blower blocked off to heat it up quick so I will turn it down the turn it back up

hose must shrink about 6' or 7'
 

Mr.V

Member
Joined
Aug 2, 2008
Messages
199
with a PTO I'd fire up after layin hose

with a slide in i'd let the machine Idle until ready to hook up and crank up the rpm's then hook up
 
Joined
Nov 8, 2006
Messages
3,373
Name
Ron lippold
jim i dont konw for sure but it seems like i loose 15 20 ft after a few minutes
 

Brian R

Member
Joined
Jun 13, 2008
Messages
19,945
Name
Brian Robison
Just make sure that the other end of the hose isn't open and you suck a puppy or small child into it or something.
 

sweendogg

Member
Joined
Jan 15, 2008
Messages
3,534
Name
David Sweeney
You would think the manufacturers would ge the clue and start making vac hose 60 feet increments so when its plugged in, it maintains atleast the right length as the solution hose.
 

Desk Jockey

Member
Joined
Oct 9, 2006
Messages
64,833
Name
Rico Suave
pull in a little extra to account for shrinkage.

Then crank it up and hookup.
 

Johnny

Supportive Member
Joined
Oct 22, 2006
Messages
2,375
Name
Johnny
My vac's so powerful it turns the hose inside-out if I don't hook up first.

______________________

STOP GLOBAL COOLING!
 

Rex Tyus

Member
Joined
Oct 7, 2006
Messages
3,720
Jim Martin said:
....get everything all set up and turn on your machine......
do you hook the vacuum hose up to the wand and then ramp up your machine......
or ramp it up and then hook up your hose......???

how much hose back lash do you get...........

Hook everything up first. I think it can be a hazard to have an open, unattended vac hose in the home. Lose 5 or 6 feet when turn it on. Another 5 or 6 feet when the wand hits the floor. I have learned to make sure the lead length(12 ft) is extra hose.
 

Ron Werner

Member
Joined
Nov 25, 2006
Messages
8,726
Name
Ron Werner
since I started using the superflex and the 2.5", I haven't noticed any backlash. I've never even though about it for since July. Maybe a6 or 7 inches max.

Used to be a couple feet with my old hose! Boy would that single wall stuff suck back!
 
Back
Top Bottom