5 years old

[Trip Moses]

I hope the coatings on my new 570 hold up better than this one. Machine is 5 years old with 2000 hours. Works excellent. Looks like hell. I’m going to either have to do a lot of disassembly and painting or find someone who doesn’t care.

 

[Nomad74]

I don't care, How much as is?

 

[Trip Moses]

I don't care, How much as is?

$10,000

 

[Mike J]

I hope the coatings on my new 570 hold up better than this one. Machine is 5 years old with 2000 hours. Works excellent. Looks like hell. I’m going to either have to do a lot of disassembly and painting or find someone who doesn’t care. View attachment 118604View attachment 118605View attachment 118606View attachment 118607

Nice looking machine. Thing is clean

 

[Mikey P]

So at this point I got to ask, what are you keeping?

 

[hogjowl]

The whole machine if nobody buys it
Idiot

 

[Trip Moses]

So at this point I got to ask, what are you keeping?

My new van, new 570, SS upholstery tool,
two 2x12 Devs, 15” Zipper, 12” Turbo Hybrid, Westpak HS wand, carpet repair tools, carpet rake, carpet brush and and grout brush. I think that’s it.

 

[Mikey P]

My new van, new 570, SS upholstery tool,
two 2x12 Devs, 15” Zipper, 12” Turbo Hybrid, Westpak HS wand, carpet repair tools, carpet rake, carpet brush and and grout brush. I think

I would keep one of the Dev 12s
And replace it with a sapphire 12. Which not only extracts better but has toolless, stressless, behind your back glide swap outs and when you put a 2-in vacuum to it, the brush glide out performs that Westpac in every way.

 

[Trip Moses]

I would keep one of the Dev 12s
And replace it with a sapphire 12. Which not only extracts better but has toolless, stressless, behind your back glide swap outs and when you put a 2-in vacuum to it, the brush glide out performs that Westpac in every way.

I’m not buying another damn tool for my business unless something FN breaks. That being said I need to order new glides for the 12’s.
I’m sending my 14”brush glide to Swani with the wands he bought.

On another note. Your beloved SS12 will never be able to do this.

Would you just look at that dry floor!!!

 

[Mikey P]

I’m not buying another damn tool for my business unless something FN breaks. That being said I need to order new glides for the 12’s.
I’m sending my 14”brush glide to Swani with the wands he bought.

On another note. Your beloved SS12 will never be able to do this.
View attachment 118627
Would you just look at that dry floor!!!

do what?
leak 8 inches out every time you use the swivel or cant keep the 1.5 vac opeiong flush with thwe floor?

I still have mine mind you, and have owned all the others.


The 2"m 12 is king

 

[Trip Moses]

do what?

Go under toe kicks. I don’t have a problem with thewater coming out the side a little. It’s definitely not 8 inches. That’s an over exaggeration . You still have to dry stroke with the brush glide. Recovery is the absolute same after a dry dry stroke.

 

[Trip Moses]

I’m also keeping a Rotovac 360i

 

[clean image]

Put me in the interested column

 

[Trip Moses]

Put me in the interested column

Orlando? I’ll bring it to you.

 

[clean image]

That's a good pot sweetener

 

[Mikey P]

Go under toe kicks. I don’t have a problem with thewater coming out the side a little. It’s definitely not 8 inches. That’s an over exaggeration . You still have to dry stroke with the brush glide. Recovery is the absolute same after a dry dry stroke.

Wait till you brush ring wears in. You'll start seeing massive leakage.

Every hard surface tool needs dry strokes unless it's a squeegee wand held at a very exact angle the entire stroke , which is impossible and extremely aggravating

 

[Mike J]

I hope the coatings on my new 570 hold up better than this one. Machine is 5 years old with 2000 hours. Works excellent. Looks like hell. I’m going to either have to do a lot of disassembly and painting or find someone who doesn’t care. View attachment 118604View attachment 118605View attachment 118606View attachment 118607

I would just tie my hair back, tuck in all my necklaces, shorten up my nose ring and just remove all the panels. Runs a little cooler.

I like that machine.

 

[Trip Moses]

Wait till you brush ring wears in. You'll start seeing massive leakage.

Every hard surface tool needs dry strokes unless it's a squeegee wand held at a very exact angle the entire stroke , which is impossible and extremely aggravating

Just like your glides. They sell replacements.
BTW. I don’t have a problem with your brush glide. It’s just not for me.

It’s not about the Glide

 

[Mike J]

Just like your glides. They sell replacements.
BTW. I don’t have a problem with your brush glide. It’s just not for me.

do you sell the brush ring? I need one

 

[Trip Moses]

That's a good pot sweetener. @Clean Rug Doug

It’s already sold Homie. Thanks though.

 

[Trip Moses]

do you sell the brush ring? I need one

Sure. I can drop ship it for an 800% markup. How many you want?

 

[Mikey P]

do you sell the brush ring? I need one

For what tool?

 

[Mike J]

For what tool?

 

[Trip Moses]

Shipping a TM is not easy.

 

[Mikey P]

whi is it so rusty?

 

[Trip Moses]

whi is it so rusty?

Idk. Maybe because most us don’t live in the desert and get rained on (thunderstorms) while we are working at least once a week.

 

[Mikey P]

interesting concept.

 

[Nomad74]

interesting concept.

I believe Trip throws bath salts on it every night . It's a Georgia thing.

 

[Trip Moses]

I believe Trip throws bath salts on it every night . It's a Georgia thing.

What

 

[BIG WOOD]

What

he's a fookin fool