- Joined
- Jan 23, 2007
- Messages
- 304
Changing belts on my PC 405 revealed a brittle and broken 3" exhaust hose. Any max temp specs for a replacement? I was going to use 3" marine exhaust hose.....
Blower exhaust hose specs
- Thread starter MerCrewser
- Start date
- Joined
- Oct 7, 2006
- Messages
- 5,795
- Name
- Larry Cobb
MerCrewser;
As you have noticed, it will fail under the blower heat.
We have 3" OEM quality black exhaust hose in stock. It is rated @ 275° and the most economical.
On our TM's, we use a multi-ply hi-temp hose with formed elbows and 45° elbows (good to 500°).
You also need T-bolt hose clamps.
http://www.cobbcarpet.com/tmacc.html
It is available in straight hose and elbows.
Larry
As you have noticed, it will fail under the blower heat.
We have 3" OEM quality black exhaust hose in stock. It is rated @ 275° and the most economical.
On our TM's, we use a multi-ply hi-temp hose with formed elbows and 45° elbows (good to 500°).
You also need T-bolt hose clamps.
http://www.cobbcarpet.com/tmacc.html
It is available in straight hose and elbows.
Larry
- Joined
- Mar 24, 2009
- Messages
- 3,547
- Name
- gene miller
Larry does that stuff come large enough to fit over 4"
Gene
Gene
- Joined
- Oct 7, 2006
- Messages
- 10,877
- Name
- Jim Martin
do you have 5 inch elbows........
- Joined
- Oct 7, 2006
- Messages
- 5,795
- Name
- Larry Cobb
Gene & Jim;
The 4" hose is available.
A few 5" pieces are available. I'll have to check on the 5" elbows.
Larry
The 4" hose is available.
A few 5" pieces are available. I'll have to check on the 5" elbows.
Larry
- Joined
- Oct 7, 2006
- Messages
- 10,877
- Name
- Jim Martin
Larry Cobb said:
let me know I am in need of one....maybe 2
- Joined
- Jan 23, 2007
- Messages
- 304
I have to get it running asap, so I'm going back with marine exhaust. It failed when I tried moving the blower, but it was very brittle. Also, 405s have 3.5", I was wrong about the 3".
