Good service

[Nate The Great]

I do, Matt. And your momma loves you. That's all you need.

A face only a mother could love?!?

 

[JS41035]

No.
10 inches of lift

That's weird. I've heard other cleanco guys say the same, the 56 didn't feel any better than the 47. But I know WM ran the 1200 HV with the 56 set at 18-20 hg. I have to believe that butler stayed with the 47 spinning fast and at 15hg for a reason. Maybe the 47 is the limit for a blend of CFM,lift and belt longevity.

 

[steve_64]

So what RPM should I run my 56 at for best performance? I'm at about 1500 now.

 

[JS41035]

So what RPM should I run my 56 at for best performance? I'm at about 1500 now.

 

[steve_64]

Guess I'll leave it alone.

 

[Bob Savage]

..

 

[Old Coastie]

Portable alert!

And your momma loves me.

Waterhead.

 

[BIG WOOD]

And your momma loves me.

Waterhead.

The Momma jokes have Come back! Just like Marty's Momma told me to Come Back after lunch.

 

[Sierra Clean Care]

I also had an experience with good service today. I walked into a custom fab shop, and had them make me up a 2 1/2" split into 2, 2" Y..... I said I needed it fast, the owner pulled one of his guys off what he was doing, and had it done in 45 min...... Stainless..... That's service!

 

[Sierra Clean Care]

Th

Guess I'll leave it alone.

thats engine RPM, what do you have the blower spinning at?

 

[steve_64]

Th

thats engine RPM, what do you have the blower spinning at?

No clue

 

[Sierra Clean Care]

No clue

Do you have a tack on you're control panel? You should....

 

[steve_64]

Do you have a tack on you're control panel? You should....

Yes that's at 1500

 

[Sierra Clean Care]

Yes that's at 1500

My Compact 47 'recommends 2850.... I'm running @ 3150...... Keep it clean, overservice it.... Bump it up, a little... 1750.....??????

 

[steve_64]

My Compact 47 'recommends 2850.... I'm running @ 3150...... Keep it clean, overservice it.... Bump it up, a little... 1750.....??????

It got LOUD.

 

[steve_64]

My blower heat exchanger is shot. I'm thinking of removing it temporarily and replacing the silencer. Want to see if it helps it breathe better.

The blower needs replacing too. Lots of hours and has a knock sometimes.

 

[JS41035]

3150 engine is crazy rpm for a direct drive. WAY to high.

 

[Sierra Clean Care]

3150 engine is crazy rpm for a direct drive. WAY to high.

I know....

 

[Sierra Clean Care]

3150 engine is crazy rpm for a direct drive. WAY to high.

The blower is spinning @ 3150.... The engine is spinning @ 2400.....

 

[Sierra Clean Care]

The blower is spinning @ 3150.... The engine is spinning @ 2400.....

I've checked the blower RPM, and checked engine RMP..... 2400.....

 

[steve_64]

Max rpm for a 56 is 2850

I was wondering at what RPM do you get the max airflow.

 

[Sierra Clean Care]

Max rpm for a 56 is 2850

I was wondering at what RPM do you get the max airflow.

I will find out tomorrow what my 47 is capable of......

 

[Sierra Clean Care]

I will find out tomorrow what my 47 is capable of......

I will be insulating the solution hose for 60' from the truck.......

 

[steve_64]

I may have to get some gages someday. It's fun making tweaks and seeing the difference at the wand. It makes me wonder what the numbers really are.

 

[Lee Stockwell]

I may have to get some gages someday. It's fun making tweaks and seeing the difference at the wand. It makes me wonder what the numbers really are.

I wonder about your numbers too. Coming from a Bane skews expectations

 

[steve_64]

I wonder about your numbers too. Coming from a Bane skews expectations

Bite me!

 

[Lee Stockwell]

I had two, so I've already been bitten.

 

[Sierra Clean Care]

E

I had two, so I've already been bitten.

Ever had a Cleanco Lee?

 

[steve_64]

I just woke up from my nap and made me one.

 

[Lee Stockwell]

E

Ever had a Cleanco Lee?

No. I do have a WM pro 2000, similar to Steve's machine.