Tell me I don't need a 570...

[Meter Maid]

I get crazy when it's time to buy something and I've gone from a Judson to know considering a 570... or a Titan 575...

You f'ers don't know... I might need to run 647 feet of hose someday...

 

[Mike Draper]

A 570 has a 47 blower right?

 

[Meter Maid]

Yes and and the sweet Kubota motor.

 

[Mike Draper]

I run that motor and it’s excellent. Best engine out there in that size. You’ll mOST likely wear out all the components on that machine before that motor is even 1/4 used up.

 

[Cleanworks]

I get crazy when it's time to buy something and I've gone from a Judson to know considering a 570... or a Titan 575...

You f'ers don't know... I might need to run 647 feet of hose someday...

Well then you should buy Ron Beatty's Aerotech. You could run all the hose you want

 

[Meter Maid]

I really don't need all that, but I want all that.

I did VLM a YMCA the other night that really would've been faster in a couple area with HWE. Would've been a 400 foot run easy and can't do that with my little machines.

 

[Cleanworks]

I really don't need all that, but I want all that.

I did VLM a YMCA the other night that really would've been faster in a couple area with HWE. Would've been a 400 foot run easy and can't do that with my little machines.

with Ron's machine you can hire a helper and dual wand with 2 400 foot hose runs.

 

[Meter Maid]

Ron's machine?

 

[Cleanworks]

Ron Beatty is selling his 2014 Aerotech for $74,000 in another thread. When you watch Aerotech's video, it makes you want one.

 

[Meter Maid]

Ron Beatty is selling his 2014 Aerotech for $74,000 in another thread. When you watch Aerotech's video, it makes you want one.

Hell
No

 

[Cleanworks]

Hell
No

I want one. I don't know where the heck I would park it but it sure is one powerful machine. Be a pain to drive around the city.

 

[Acp]

Judson is a good machine but not if your planning on having a tech run it, Im really thankful we have such an awsome tech that runs that truck I would never trust propane heat to probably anyone else.

Also when this motor/blower are done Im going to see about upgrading to a 47 on the TNT and possibly a different fuel fired heat source other than a little giant.

 

[Meter Maid]

Don’t feel like you have enough suck from the 45?

 

[Acp]

Don’t feel like you have enough suck from the 45?

its great for residential, we only burn 1.5 gallons per hour of propane for the machine and water heater... but ya beyond 200+ ft idk.

 

[Trip Moses]

I love my 570!! I never wish for anything different. Whatever you get an APO should be on your list.

 

[Meter Maid]

I love my 570!! I never wish for anything different. Whatever you get an APO should be on your list.

You do commercial? If residential, do you really need a machine that size?

 

[Trip Moses]

You do commercial? If residential, do you really need a machine that size?

I’m 70% residential. Even the commercial that I do is rarely over 200 feet. Honestly a 370 would be fine most of the time but I chose the 570 for the motor and the type of blower. I liked the build of the 570 better.

 

[Meter Maid]

I’m 70% residential. Even the commercial that I do is rarely over 200 feet. Honestly a 370 would be fine most of the time but I chose the 570 for the motor and the type of blower. I liked the build of the 570 better.

I’d think the heat would be a lot better on the 570 also, compared to the 370.

 

[Trip Moses]

It is a hot machine.

 

[Trip Moses]

Plus... I prefer to bring a gun to a knife fight.

 

[CJ-FL]

Yes and and the sweet Kubota motor.

Steemer vans utilize the Kubota 972... it really is an amazingly durable motor.... is almost no maintenance they just keep running.

 

[DAT]

Ya overthinking thinking this.

 

[Mikey P]

A 570 has a 47 blower right?

4.8

 

[Mikey P]

Steemer vans utilize the Kubota 972... it really is an amazingly durable motor.... is almost no maintenance they just keep running.

Is that what's in the new Everest?

I would love to have a new Steamer Transit

 

[Justin Legend Brands]

Is that what's in the new Everest?

I would love to have a new Steamer Transit

No, the Everest 870 has the Kubota WG1605

 

[Chris A]

There's a brand new 575 at interlink supply of Cleveland that's been on the floor for two years, I know Dan will get real aggressive to move it!

 

[Chris A]

Steemer vans utilize the Kubota 972... it really is an amazingly durable motor.... is almost no maintenance they just keep running.

I wish they'd sell those vans to us non steemer bumpkins!

 

[Meter Maid]

There's a brand new 575 at interlink supply of Cleveland that's been on the floor for two years, I know Dan will get real aggressive to move it!

Wonder why that thing is been sitting there so long. I’ve never ran a 575 but I hear they’re monsters.

 

[Chris A]

They sell a lot of machines I'm not sure why it hasn't moved, I'd give them a call though if your at all interested

 

[Meter Maid]

They sell a lot of machines I'm not sure why it hasn't moved, I'd give them a call though if your at all interested

My only concern would be where to get it serviced. I know other dealers have to honor the warranty’s, they could make me wait in line for a month. I’m almost 4 hours away from Cleveland.